• EPC-COND
Data Sheet

AC filtering power electronics capacitors are used at the output of DC/AC inverters where extreme operating conditions are required with very high AC voltages, such as wind generators, solar inverters, UPS applications, harmonic filtering with unusual levels of harmonic distortions or those cases in which the current is not sinusoidal and with pulses.

RTR Energía’s EPC FT (three-phase AC filter capacitor) and EPC FS (single-phase AC filter capacitor) capacitors offer very low resistance and inductance, thus meeting the different needs of customers.

RTR Energía’s manufacturing experience allows it to offer a wide variety of filter capacitors at different voltages and capacities made with the best quality materials. These capacitors also have a safety system by disconnection due to overpressure and V0 self-extinguishing polyurethane resin, with certification. UL94 and manufactured by RTR Energía with certification number: 20141031-E470994.

SERIE EPC AC FT
Capacitors for filtering power electronics in three-phase AC

Utility and
characteristics
Safety Safety and materials Certificates and
normatives
• Specially designed for applications filtering in electronics of power
• Dry type.
• Connector.
• Indoor use.
• Overpressure
disconnection system.
• Metallized polypropylene film low loss self- ealing, high density, high temperature and higher dielectric strength Volt/μ.
• Self-extinguishing polyurethane resin V0, elaborated under regulations UL94 for RTR energy and with certification 20141031-E470994.
• Aluminum pot M12x16.
• IEC 61071.
• UNE-EN 61071.
Technical characteristics
Voltage (Urms) Up to 1200VAC Test voltage between terminals 1.5xUrms 10s Useful life >100.000h
Capacity (Cn) Up to 200μF Test voltage between
terminals and box
5kV AC para 1min Storage temperature -40°C +85°C
Tolerance -10% +10% Degree of protection IP-20 Altitude ≤2000m.s.n.m.
Delta tangent (δo) (100Hz) 2×10-4 Humidity Max.95% Installation position Universal
Maximum allowed
overvoltages
1.10xUn (30% of the loadduration)
1.15xUn (up to 30min/day)
1.20xUn (up to 5min/day)
1.30xUn (up to 1min/day)

SERIE EPC AC FS
Capacitors for filtering power electronics in single-phase AC

Utility and
characteristics
Safety Safety and materials Certificates and
normatives
• Specially designed for applications filtering in electronics of power
• Dry type.
• Connector.
• Indoor use.
• Overpressure
disconnection system.
• Metallized polypropylene film low loss self- ealing, high density, high temperature and higher dielectric strength Volt/μ.
• Self-extinguishing polyurethane resin V0, elaborated under regulations UL94 for RTR energy and with certification 20141031-E470994.
• Aluminum pot M12x16.
• IEC 61071.
• UNE-EN 61071.
Technical characteristics
Voltage (Urms) Up to 1400VAC Test voltage between terminals 1.5xUrms 10s Useful life >100.000h
Capacity (Cn) Up to 400μF Test voltage between
terminals and box
5kV AC para 1min Storage temperature -40°C +85°C
Tolerance -10% +10% Degree of protection IP-20 Altitude ≤2000m.s.n.m.
Delta tangent (δo) (100Hz) 2×10-4 Humidity Max.95% Installation position Universal
Maximum allowed
overvoltages
1.10xUn (30% of the loadduration)
1.15xUn (up to 30min/day)
1.20xUn (up to 5min/day)
1.30xUn (up to 1min/day)